Silicone oil Manufacturer: SD

Обычная цена
Обычная цена Цена со скидкой
Обычная цена
Обычная цена Цена со скидкой

1. Synonyms

amide,n,n-dimethyl-formicaci;Dimethylamidkyselinymravenci;dimethylamidkyselinymravenci;N,N-DIMETHYLFORMAMIDE,99.9+%,HPLCGRADE;NN-DIMETHYLFORChemicalbookMAMIDE99.8%A.C.S.&;N,N-DIMETHYLFORMAMIDE,4X25ML;N,N-DIMETHYLFORMAMIDE,MOLECULARBIOLOGYREAGENT;N,N-DIMETHYLFORMAMIDENEUTRALMARKER*FORCAPILLARY

2. Usage

Silicone oil is a versatile and commonly used material that finds application in various industries and fields. Here are some of the key areas where silicone oil is used:

  1. Lubrication: Silicone oil possesses excellent lubricating properties. It is used as a lubricant in various mechanical systems, such as bearings, gears, and valves. Due to its high viscosity and thermal stability, it can provide long-lasting lubrication even at high temperatures and under extreme conditions.
  2. Sealant and Adhesive: Silicone oil is used as a base material in the production of silicone sealants and adhesives. These products are widely used in construction, automotive, and electronics industries for sealing joints, bonding substrates, and providing waterproofing properties.
  3. Heat transfer fluid: The high thermal stability and low volatility of silicone oil make it an ideal choice for heat transfer applications. It is used in heat exchangers, hydraulic systems, and cooling systems to efficiently transfer and dissipate heat.
  4. Electrical Insulation: Silicone oil possesses excellent electrical insulating properties. It is used in electrical and electronic equipment to insulate and protect components from electrical shocks, moisture, and contaminants.
  5. Medical Applications: Silicone oil is used in various medical devices, such as prosthetics, catheters, and syringes, due to its biocompatibility and non-reactivity with human tissues. It can also be used as a lubricant during surgical procedures.
  6. Personal Care Products: Silicone oil is commonly found in personal care products such as shampoos, conditioners, lotions, and cosmetics. It acts as a conditioning agent, offering smoothness, shine, and heat protection to hair and skin.
  7. Mold Release Agent: Silicone oil is used as a mold release agent in the manufacturing of rubber, plastic, and composite materials. It prevents adhesion of the molded product to the mold surface, allowing easy removal without damaging the object.
  8. Foam Control: Silicone oil is utilized as an antifoaming or defoaming agent in various industries, including food and beverage, agriculture, and wastewater treatment. It helps to control the formation and stability of foam, improving processing efficiency and product quality.
  9. Surface Treatment: Silicone oil is used as a surface treatment agent to enhance the appearance and performance of materials. It can provide water repellency, smoothness, and anti-static properties to fabrics, plastics, and metals.

Overall, silicone oil has a wide range of applications due to its unique combination of properties such as high thermal stability, low surface tension, excellent lubrication, electrical insulation, and biocompatibility. Its versatility makes it a valuable material in numerous industries.

.

3. COA

Certificate of Analysis (COA)
Form No:QR8.7-005
Product Name Silicone Surfactant Production Date 2021.10.18
Product Code SD-622 Testing Date 2021.10.19
Batch No. 202110-005
 
Item of Test Specification Testing Result
Appearance,25℃ Transparent viscous liquid Transparent viscous liquid
Viscosity,mPa.s 520~720 637.3
Water Content,%  ≤0.15 0.069
Solvent pH,25℃ 5.5~7.5 6.57
Conclusion Passed  
Analyst:                                Checker:
Instructions for product storage and handling:
1.  Store  in  a  dry  and  cool  place.  Product  shelf  life  is  12  months  in  original  sealed drums. Product can still be used if it passes quality tests after 12 months.
2. Product may become hazy at low temperatures. It will change back to clear when
heated to a certain temperature.

 

3. MSDS

MATERIAL SAFETY DATA SHEET
Section 1:Product and Company Identification:
Common Name                    : Silicone foam stabilizer/surfactant Product No                           : SD-622
Manufacturer                       : Suzhou SD New Materials Co.,Ltd Manufacturer Address         : Building 2, Pangjin industrial Park, No.1801
Pangjin Road, Wujiang District,Suzhou City, China
Tel                                         : +86512-63636108
Fax                                        : +86512-63636128
Email                                    : carrie@siltechnm.com
Section 2:Material component info
Pure/Mixture                       :Pure                            Mixture
 
Polysiloxane - polyether copolymer
Section 3:Hazards identification
No hazards to environment or human.
Section 4: First –Aid Measures
Ingestion:
Call  a  physician  or  Poison  Control  Center.  Drink  1  or  2  glasses  of  water  and induce vomiting by gently touching back of the throat with finger. Do not induce vomiting or give anything by mouth to an unconscious person.
Eye contact:
Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call
a poison control center or doctor for treatment advice.
Inhalation:
Move  person  to  fresh  air  and  keep  comfortable  for  breathing.  If  person  is  not breathing,   call   911   or   an   ambulance   immediately,   and   then   give   artificial respiration.
Skin Contact:
Take off contaminated clothing. Rinse  skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment advice.
Delayed symptoms:
None Known.
Indication of immediate medical attention or special treatment:
Trouble breathing, persisting skin or eye irritation, nausea or vomiting.
First-aid  rescuer  protection:  wear  personal  protective  device,  such  as  gloves, safety goggles or glasses, breathing protective device.
Section 5:Fire-Fighting Measures
Suitable extinguishing Media: Foam, CO2, dry chemical, water.
When  the  fire  is  small,  Foam,  CO2,  dry  chemical  can  be  used.  When  the  fire become big, recommend to use water spray.
Other info: Water spray can be used for cooling unopened container.
Special protective equipments and precautions for fire fighters:
Wear self-contained breathing apparatus with full positive pressure face piece and appropriate protective clothing.
Section 6:Accidental release measures
Personal protection measures:
Use  personal  protection  equipments,  protect  over-inhalation  gas,  guarantee sufficient ventilate, remove all fire source.
Environmental protection measures:
Under the condition of safety, take measures to protect further leakage or overflow. Any leakage or overflow discharge into drain were forbidden.
Cleanup measures:
Contain  and  absorb  with  an  inert  absorbent  while  wearing  appropriate.  Avoid
discharge  to  drain  and  environment.  Place  absorbed  material  in  a  clean,  closed container for waste disposal. Wash area with water.
Section 7:Handing and storage
Keep container sealed, store in a dry place away from heat, sparks or open flame. Do not store with incompatible material like strong acids, strong bases, and strong oxidizing agents.
Use anti-explosion electric appliance/ventilate/lighting facility. Take measures to prevent sparks/static electricity.
Opened  container  must  be  resealed  carefully  and  placed  vertical  to  prevent
moisture absorption or leakage.
Section 8:Exposure Controls/personal protection
Component Exposure limits
There are no component with workplace exposure limits/
Engineering Controls
Local Ventilation :Recommended. General Ventilation: Recommended.
Personal Protective Equipment for Routine Handling
Eyes: use chemical worker’s goggles.
Skin: Washing at mealtime and end of shift is adequate.
Suitable  Gloves:  Avoid  skin  contact  by  implementing  good  industrial  hygiene practices  and  procedures.  Select  and  use  gloves  and/or  protective  clothing  to further  minimize  the  potential  for  skin  contact.  Consult  with  your  glove  and/or personal   protective   equipment   manufacturer   for   selection   of   appropriate compatible materials.
Inhalation: No respiratory protection should be needed. Suitable Respirator: None should be needed.
Personal Protective Equipment for Spills
Eyes: Use chemical worker’s goggles.
Skin: Washing at mealtime and end of shift is adequate.
Inhalation/Suitable: No respiratory protection should be needed. Respirator:
Precautionary  Measures:  Avoid  eye  contact.  Avoid  skin  contact.  Do  not  take
internally. Use reasonable care.
Section 9: Physical and Chemical properties
Physical Form:
Appearance(+25℃)         :Viscous Liquid
Color                                           :Colorless to amber
Odor                                             :Slight
Safety Data:
Freezing/Melting Point                :Not available
Boiling Point                                :Not available
point of flammability                    :Not available
Light point                                    :Not available
Upper explosive limit                    :Not available
Lower explosive limit                    :Not available
Vapor pressure                             :Not available
Vapor Density                               :Not available
Solubility in Water                       :Not available
Density Range                             :(1.05±0.05)g/cm3
PH Value                                      :5.5—7.5
Viscosity                                      :(620±100)mm2/s
Section 10:Stability and Reactivity
Chemical Stability                         :Stable
Hazardous                                    :Hazardous polymerization will not occur. Polymerization
Conditions to Avoid
Materials to Avoid                     :    Oxidizing material can cause a reaction. Water,
alcohol,  acidic  or  basic  materials,  and  many metals or metallic compounds, when in contact with product, liberate flammable hydrogen gas,
which can form explosive mixtures in air.
Section 11: Toxicological Information
No Known applicable information under condition of correct operation.
Section 12:Ecological Information
Directly put into drain system is forbidden, slight pollution for water.
Section 13:Disposal considerations
Can be incinerated in accordance with local regulations. Call local hazardous waste disposal company or provincial waste authorities for more information.
Section 14: Transport Information
Sealed transportation, prevent leakage or moisture absorption, no belong to dangerous goods.
It’  better  to  transport  in  the  morning  or  night  during  summer,  avoid  high temperature transportation.
Declaration (railroad and road) ADR/RID: No dangerous Good.
Declaration (transport by sea) IMDG-Code: No dangerous Good. Declaration (transport by air) IATA/DGR: No dangerous Good.
Section 15: Regulatory Information
None.
Section 16:Other Information
Reference       Documents:       China       Chemicals       safety       instruction regulations(GB16483-2000)
Version:9th Oct,2019
Further Information:
All right reserved by Suzhou SD New Materials Co.,Ltd
These above info was made based on the assessment of our products. If the storage time far over expiration date, please contact with us before use.
These  data  are  offered  in  good  faith  as  typical  values  and  not  as  product specifications. No warranty, either expressed or implied, is hereby made. The recommended industrial hygiene and safe handing procedures and believed to be    generally    applicable.    However,    each    user    should    review    these recommendations in the specific context of the intended use and determine
whether they are appropriate.

 

4. TDS

SD-622 Silicone foam surfactant
Product    introduction:
SD-622  silicone  foam  stabilizer  is  high  efficiency  silicon-carbon  based  non-hydrolysable silicone  foam  stabilizer,  own  excellent  combination  property,   suitable  for  HCFC/HFC foaming systems, can be used for panel, pipes, spray, refrigerator etc.
Product Characteristic:
•  Good  emulsification  performance.  Good  emulsification  makes  the  blended  polyols mixed well with  isocyanate,  owned good flowability,  the product’s foam cell uniform distribution, few string-holes, high percentage of cell close.
•  Good nucleation performance, special molecular structure, good control cell surface tension,  made  foam  smooth  and  uniform  distribution,  excellent  heat  conductivity isolation,  good  performance  in  HCFC-141B,petane  and  245fa  foaming  systems
HCFC-141B,petane and 245fa foaming systems.
•  Good   foam   stable   performance,   save   material   consumption,   reduce   cost,   the recommend usage should be 2 parts per 100 parts polyol.
Physical property:
Item Qualify scope
Appearance Transparent viscous liquid
pH value    25℃ 5.5-7.5
Viscosity 25℃【mPa.s】 620±100
Density 25℃【g/cm3】 1.05±0.05
Moisture【%】 ≤0.15
Storage and usage Note:
1. Store in cool, dry place. We guarantee a shelf life of at least 12 months upon delivery under the condition that it is stored in factory-sealed containers and protected against extreme weather conditions. It can be still used when past the test after 12 months.
2. This products is water solubility, if splashed, please use water to wash.
3. The product may be become turbid, that will not influence to use, after heat to 30℃, it
will become transparent.
Package:
200kg  iron  drums  or  1000kg  plastic  containers.  If  specially  requested,  25Kg  can  is available.

Q&A


What is the payment terms?

T/T, L/C, D/P, etc.

Which kind of package do you have?

carton, Iron drums, IBC Drums, Flexitank, ISO TANK and bags
etc.

How can I get samples?

We provide you samples for free, but you have to pay for the
courier charges.

Can you give me a discount price?

Yes. It depends on your qty.